Description
Teflon Grease Manufacturers & Suppliers in India
Teflon Grease high-performance grease combines a synthesized hydrocarbon base fluid with a lithium complex soap thickener. The thickener systems provided a high dropping point. Excellent resistance to water wash tenacious structural stability. The unique physical properties of the synthetic base oil, combined with selected additives, provide outstanding protection against wear, rust, corrosion, and high-temperature degradation. The wax-free feature of the synthetic base oil allows for low-temperature mobility / pumpability and very low starting and running torque values. Also, the traction property of the synthetic base fluid is considerably lower than mineral oil, allowing for temperature reductions in the load zone of rolling element bearings. Teflon Grease manufacturers, suppliers and exporters in Mumbai, India to all over the world. Ask for Teflon Grease price here.
Application:
DRP is recommended for aviation applications that need a lubricant that can perform normal functions yet go far beyond in terms of high and low temperature and long-life performance. It is NLGI Grade 2 grease having the cold-temperature pumping resistance of most mineral oil NLGI Grade 0 greases. It is true wide-temperature, multi-service grease.
Typical Characteristics:
Physical characteristics are listed in the table. Those not shown as maximum or minimum are typical and may vary slightly.
Advantages:
MRSLG is synthetic grease that provides these advantages when compared with mineral oil grease intended for similar service:
- Operating range of –60°C. (-76°F.) TO +225°C. +(437°F.)
- Excellent resistance to rust, corrosion, and oxidation.
- Outstanding structural stability in the presence of water.
- Excellent wear protection under heavy loads and high temperatures.
- Power-saving capabilities.
- Extended relubrication intervals- Low volatility
Technical Test Report
| NLGI GRADE | 2 |
|---|---|
| Soap type | Lithium complex |
| Structure/th> | Smooth, Slight Tack |
| Additive | P.T.F.E (Teflon) |
| PENETRATION AT 250°C(770°F.) | 770°F |
| ASTM D 217, worked, 60 strokes | 280 |
| 10,000 strokes | 295 |
| 1,00,000 Strokes | 305 |
| Dropping Point | 0°C (0°F.) |
| ASTM D 2265 | 220 (428) |
| Base Oil Viscosity | |
| cSt at 400°C | 46 |
| cSt at 1000°C. | 7.8 |
| ISO VG, Base Oil | 46 |
| EP and wear protection Four-Ball wear, scar Dia, mm, max. Four-Ball EP, Weld Load, ASTM D 2596, kg. | None |
| Four-Ball EP, Load wear Index. Corrosion Prevention, ASTM D 1743 | Pass |
| Emcor/SKF Water wash Test, IP 220 | 0 |
| Water Washout, ASTM D 1264, 79°C(175 °C °F.) wt. % max | 5.5 |
| Evaporation, ASTM D 972, % at | 177 °C. (350 °F.) |
