Description
Silicone Oil (All Viscosity) Manufacturers & Suppliers in India
Silicone Oil is a clear water Silicone Fluid manufacturers in India available in viscosities ranging from 0.65 centistokes to 1,00,000 centistokes. Important features of fluid include: –
- Little change in physical properties over a wide temperature span…a relative flat viscosity-temperature slope and serviceability from — 40 to over 400°F (-40 to 204°C).
- Excellent water repellency.
- Good dielectric properties over a wide range of temperature and frequencies.
- Low surface tension – readily wets clean surfaces to impart water repellency and release characteristics.
- Low –toxicity – tests have established that SILICONE OIL is essentially Nontoxic and non-irritating (although temporary discomfort may result if rubbed into the eye).
Silicone Oil also exhibits heat stability, oxidation resistance, very low vapour pressure, and high flashpoints. It is insoluble in organic liquid other than active solvents and is non-greasy, non-rancidifying and virtually odourless.
What is Silicone Fluid?
Solubility:
The solubility of SILICONE OIL varies somewhat according to the viscosity chosen. The low viscosity grade are more completely soluble in a given solvent than are the higher viscosity grades. Since solubility varies, testing is recommended before attempting volume operations. The solubility of the silicone fluid in a number of commonly-used solvents as indicated below. Flammability and toxicity should also be important considerations in the choice of a solvent.
[heading size=”3″ heading_class=”heading” heading_style=”style-1″]Uses[/heading] Its unique combination of outstanding properties suit SILICONE OIL from a variety of application functions, as well as for a wide range of products and process.
- As a Release Material:
Used alone or as part of a compounded formula, SILICONE OIL provides an odourless, non-toxic, non-carbonizing mould release for rubber, plastics & metal die castings. - As a Foam Preventive:
Extremely small amounts of the fluid effectively control foam in many procession operations, especially in non-aqueous systems. - As a Mechanical Fluid:
Excellent viscosity-temperature characteristics, thermal and chemical stability shear breakdown resistance, compressibility makes SILICONE OIL outstanding for mechanical/hydraulic uses. Typical uses include hydraulic stabilizers, damping mediums. - As a Surface-active Material:
Added vinyl plastisol and liquid springs, SILICONE OIL improves the flow characteristics, de-aerates and lubricates the surface of the completed part. - As a Lubricant:
The fluid provides excellent lubrication for plastic and elastomeric surfaces. - The Cosmetics and Skin Preparations:
It is an important ingredient in hand creams, skin protectants, suntan lotions and hair grooming aids because it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breathe. - In Polishes and Chemical Specialties:
SILICONE OIL is used in most automobile and furniture polishes for its case of application, high gloss with minimum rubbing, and a durable water –repellent film. It is also used in many other specialty formulations, including aerosol starches and fabrics conditioners. - In Electronic Equipment:
With excellent properties, SILICONE OIL is widely used for both insulating and damping applications. Refer to specific literature on SILICONE OIL, electrical-grade electronic grade. - In Food Processing:
Non-contaminating and non-adulteration, it is suited to many food processing applications. When considering the fluid for uses involving FDA regulation refer to literature on Food – Grade SILICONE OIL.
Properties
| Viscosity at 25°C centistokes | Flash Point | Specific Gravity at 25°C | Visc- temp Rcefficient | Reffracive index at 25°C | Boiling Point | Electrical strength KV, mm, measured at 1.270 mm gap on electrical grade fluid only* |
|---|---|---|---|---|---|---|
| 100 | 303°C | 0.968 | 0.60 | 1.403 | 2% | 13.78 KV |
| 200 | 315°C | 0.971 | 0.62 | 1.4031 | 2% | 13.78 KV |
| 350 | 315°C | 0.972 | 0.62 | 1.4032 | 2% | 13.78 KV |
| 500 | 315°C | 0.972 | 0.62 | 1.4033 | 2% | 13.78 KV |
| 1000 | 315°C | 0.972 | 0.62 | 1.4035 | 2% | 13.78 KV |
| 5000 | 315°C | 0.963 | 0.61 | 1.4035 | 2% | 14.76 KV |
| 12500 | 315°C | 0.973 | 0.61 | 1.4035 | 2% | 14.76 KV |
| 30000 | 315°C | 0.973 | 0.61 | 1.4035 | 2% | 14.76 KV |
| 60000 | 315°C | 0.973 | 0.61 | 1.4035 | 2% | 14.76 KV |
Packing: 1Kg, 5Kg, 30Kg & 50Kg Plastic Container.
People also search for “Treadmill Machine Oil” “Methyl Phenyl Silicone Oil” “Mechanism Grease”
Bulletin: The information given in this bulletin is based on our experience which we believe to be reliable but we can’t accept any responsibility for operations not under our direct control. It is offered solely for your consideration, innovation and verification.
